Getting Started

  • 2 Replies
Getting Started
« on: May 25, 2020, 11:39:30 AM »
Dear community,
can anyone provide a tutorial on how to start the SF?
I am running the device on the Win10 machine with the latest package.
The Windows device manager tells that all USB devices are working fine.
Still it seems that I get no communication running. Besides a positive EEPROM --> Read FX3 Firmware - Feedback, I dont get nothing.
How shall I use SFserver? There are no entries, no traffic.
« Last Edit: May 25, 2020, 11:58:34 AM by blid »

Re: Getting Started
« Reply #1 on: May 25, 2020, 09:48:13 PM »
So, just fiddling around I got the signalgenerator running. Small hint: if you change something, e.g. the frequency, hit Enter. ;)
Although I found

I still do not get the osci-mode running. The software seems to freeze, whenever I start with capture as told by the document above.

Any hints?

Re: Getting Started
« Reply #2 on: May 26, 2020, 09:10:56 AM »
I finally made it to get the osci-mode running. Some crashes, some reboots, a good night sleep and start sfScope 'as admin' it worked. Great work as I see so far. Still there will be much to do, to the point where I am heading.